Page 14of 16 APHITEMPCON001-11-04
11. Manual Setting:
-
Press “SELECT” to choose “Manual Setting”, the displaywill show as in fig.12
-
Press keyone time to switches fromOFF toON.
OFF:ManualOFF
ON:Manual ON
-
Press keyone time to switches fromON toOFF.
-
Press “ENTER” key to save the setting value.
-
Ifmanual on, the displaywill show as in fig.13
P V
:
3 0 .
2 °
C
M A N U A L
O N
Fig. 12
P V
:
3 0 .
2 °
C
A 0
:
9 1 %
Fig. 13
-
IfmanualON, press keyone time to stepup the displayvalue by1%. If
pressed continuously formore than ten steps then the valuewill increment by the step
of 1.0%up to100%. Release key to stop the increment of value.
-
IfmanualON, press keyone time to stepdown the displayvalue by1%.
-
If press continuouslymore than ten steps then the valuewill decrement by the
stepof 1.0%up to0%. Release key to stop the decrement of value.
-
After 90minutes ofmanual ON operation the controllerwill return tomanual OFF
mode automatically.
12.
F1Setting :
-
Press “SELECT” to choose “F1 setting”, the displaywill show as in fig.14
-
Press keyone time to stepup the Integral time by0.1Sec. If pressed
continuously formore than ten steps then the valuewill increment by the step of
1.0Sec. up to 60.Sec. Release
key to stop the increment of value.
The range is 0.1 to60-Sec.
-
Press keyone time to stepdown the Integral time by0.1Sec. If pressed
continuously formore than ten steps then the valuewill decrement by the step of
1.0Sec. up to0.1Sec. Release key to stop the decrement of value. The range is 60
to 0.1Sec.
-
Press “ENTER” key to save the setting value.
-
This value setting shows how long the output1will update the output value
P V
:
3 0 .
2 °
C
F 1 (
I
)
1 .
0 S E C
Fig. 14
