Wellworth Ecatalog - page 102

BUTTERFLYVALVE
APEN0H-035CH33A0908
6
Automation andControl Solutions
Honeywell (Tianjin) Limited
158NanHai Road
TianjinEconomic-Technological Development Area
Tianjin, 300457, P.R.C.
Phone: +86-22-6628 7000
Fax: +86-22-2532 9935
Subject to changewithout notice. Printed inChina.
INSTALLATION
WARNING!
MOUNTINGONVALVE
Operate the valvemanually to fully opened or fully
closed position before the actuator ismounted.
Operate the actuator and valve stem to fully opened
or fully closed position.
Check that the actuator and valve stem are in correct
position. Please note, valve and actuatormust be in
the samemode (fully opened/fully closed) prior to the
assembly.
Mount the actuator on the valve and check that the
actuator and valve stem are centered and aligned.
Operate the valvemanuallywith the aid of the
actuator hand-wheel and check that the valvemoves
with normal resistance.
Check that all screws are correctly tightened.
Removepower before the cover is
dismantled!
The actuatormust behandledwith the
utmost carewhen the cover is removed
and thepower connected!
ELECTRICWIRING
Loosen the screws on the cover and lift it off.
Check the voltagemarked on the actuator label.
Connect according to the enclosedwiring diagram or
if the actuator is of standard design, according to the
wiring diagram below. Thewiring diagram is drawn in
unaffected position (the valve in the intermediate
position).
Test run the actuator from intermediate position
checking that the actuator turns in the correct
direction.
Test run the actuator and check that the limit
switcheswork correctly.
Check that the cable entries and possible blind plug
are sealed.
Mount the cover.
Note:
Electricwiringmust be carriedout by
qualifiedpersonnel only!
Wiringdiagram is also shownon the label of
top cover.
1...,92,93,94,95,96,97,98,99,100,101 103,104,105,106,107,108,109,110,111,112,...208
Powered by FlippingBook